封。。。。。。。。。。。。

[ 本帖最后由 wangjianku_0312 于 2008-8-5 12:46 编辑 ]

顺路问一下。 2000PRO 你为什么关闭http://we.pcinlife.com/viewthrea ... 26amp%3Btypeid%3D18这个帖子。

顶起。

顶起继续出。

进来看看。

人过留名↑

拍了，明天周四，请尽早发出争取后晚下班前收到。

对了。方便的话LED扔几个来玩。呵呵。

[ 本帖最后由 525252 于 2008-7-17 01:13 编辑 ]

尽快发货。

人过留名↑

自己置顶。

人过留名↑

晕。 没有表情了啊。

还是卖这个吧。哈哈。

顶起继续出售

人过留名

人过留名↑

帮顶有优惠吗  哈哈

帮顶优惠3块。 哈哈。

顶起啊

帮你顶下，再拍一个

谢谢兄弟帮顶。 今天给你发了。 呵呵。

东西不错.

收到后第一件事是,拆下来将电源接口下了(突出来的那一个接口).

并且WAN口不好看,明天把它吹下来重新接下.两边平整才好看.

能将电源接口省掉就帅了.

走网线!

[ 本帖最后由 525252 于 2008-7-19 21:40 编辑 ]

华硕的是可以 5V 供电的,即可以直接USB取电.

华硕的配置是 4M ROM,16M RAM.并且支持OPEN WRT.

可加窜口,可加USB口,可加JTAG.

这款的设备倒底和WL530有何不同?如果完全相同,那么这就是一款非常有可玩性的机子了.

刷新rom成功.
这是启动日志.

Jan  1 00:00:06 (none) user.info :  Liberated Libertas Firmware for the WL-530g
Jan  1 00:00:06 (none) user.info :  Release: 092606 (r388)
Jan  1 00:00:06 (none) user.info : **********************************************
Jan  1 00:00:06 (none) user.info : Setting conntrack table size to 1008.
Jan  1 00:00:06 (none) user.info : net.ipv4.ip_conntrack_max = 1008
Jan  1 00:00:07 (none) user.info : Conntrack table size is 1008
Jan  1 00:00:07 (none) user.info : /jffs/etc/init.d/rcS: not found
Jan  1 00:00:07 (none) user.info : /jffs/etc/init.d/S*: not found
Jan  1 00:00:07 (none) user.info : /etc/on_wan_up_begin.sh: started
Jan  1 00:00:07 (none) user.info : /etc/on_wan_up_begin.sh: finished
Jan  1 00:00:07 (none) user.info : /etc/on_wan_up_end.sh: started
Jan  1 00:00:07 (none) user.info : /etc/on_wan_up_end.sh: finished
Jan  1 00:00:08 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:08 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:09 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:10 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 11:28:12 (none) user.emerg ntp client: time is synchronized to time.nist.gov
Jul 20 03:28:16 (none) user.debug kernel: AP: drop packet to non-associated STA 00:0f:66:1c:d2:cc
Jul 20 03:28:16 (none) user.debug kernel: AP: drop packet to non-associated STA 00:0f:66:1c:d2:cc
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:16 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:33 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:39 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:39 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:40 (none) user.debug kernel: Unknown frame in AP queue: type=0x00 subtype=0x00
Jul 20 03:28:49 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:49 (none) user.debug kernel: AP: drop packet to non-associated STA 00:1b:77:49:43:ed
Jul 20 03:28:49 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:49 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:49 (none) user.debug kernel: wlan0: RX: IEEE 802.1X - passing unencrypted EAPOL frame
Jul 20 03:28:49 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame
Jul 20 03:28:49 (none) user.debug kernel: wlan0: RX: IEEE 802.1X frame

作者语:

Project hosting has now been set up and my custom firmwares renamed to Liberated Libertas. There remains a lot of work to do on the buildroot makefiles to automate the firmware image construction process. At present and utilizes the Firmware Mod Kit to extract a firmware image, allow you to manually add your own custom builds of applications or the kernel, then rebuild the image.

A seperate bran**as been created that holds jr's uClinux 2.4.32 patches.

As far as the firmware images themselves, the latest release is 09-13-06 and has the following features:

* telnetd with login.
* JFFS2 partition.
* /etc/init.d script support (and /jffs/etc/init.d).
* more busybox applets.
* wireless-tools v29 pre 10.
* bleh, much more.. and much more left to do.

Currently defined functions:
        [, [[, arping, awk, busybox, chmod, clear, cp, crond, crontab,
        cut, dd, df, dmesg, du, egrep, env, expr, false, fgrep, find,
        fold, free, ftpget, ftpput, grep, gzip, head, ifconfig, insmod,
        kill, killall, klogd, ln, logger, logread, ls, lsmod, mkdir, mkfifo,
        mktemp, modprobe, mount, msh, mv, nc, netstat, nslookup, pidof,
        ping, pivot_root, ps, rmmod, sed, seq, sh, sleep, sort, strings,
        sysctl, syslogd, tail, tar, tee, test, tftp, top, touch, tr, traceroute,
        true, umount, uname, uniq, uptime, usleep, vconfig, wc, wget,
        which